The reason why the painful bearing reverses insensitive after the device is to the device

Home>Bearing knowledge>The reason why the painful bearing is insensitive after the device to the device
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

The reason why the painful bearing reverses insensitive after the device is to the device

Source: Bearing network time: 2014-07-18

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
There are many reasons why the reverse bearing device is insensitive to reversal on the equipment; the primary reasons are as follows:
a: After the device is hurting the bearing; some fixing parts on the equipment may conflict with the rotating parts, which may cause the bearing to reverse insensitive.
b: The painful bearing is not cleaned when the device is installed; there is foreign matter between the bearing inner and outer ring raceways and the roller; the formation of the bearing reverse is not sensitive,
C: The painful bearing is in the process of the device; because the device is not properly deformed by the cage; the formation of the roller can not be sensitively changed, d: the original clearance of the bearing is better than that of the 谡獯 谌 胫帷 胫帷 18 (18) 岢 馊 胫岢 胫岢浜 保 保 捎 捎 捎 捎 捎 拷 螅 螅 螅 螅 螅 螅 螅 螅 螅 脑 脑 脑 脑 脑 脑 脑 脑 脑 脑
e: If it is a large painful bearing; after the bearing device is completed; a minimum radial load is added to the bearing; the ability to ensure a sensitive change of the bearing.

Recommend to friends comments close window

Bearing related knowledge
Bearing operating conditions and environmental conditions bearing metallurgical defects of bearings
TIMKEN Roller Bearing Repair Process Full-function CNC Bearing Heater Bearing Common Term (1)


This article links to http://
Please indicate China Bearing Network http://

Previous:How to make the bearing clearance very good. Swinging the next series: Rolling bearing machinery industry specification catalog


T bar

We are the Leading Manufacturer Pvc Moulding,Tbar,Pvc Mould,Pvc Extrusion Mould in China, it is new materials wall decoration for wall panel. 

Our Pvc Moulding and Tbar is widely used in interior decoration like hotel, restaurant, laboratory, bathroom, home etc.

It is radiation free, water-proof, fire-proof, wear resistance (green decoration material).

Feature

1. Fireproof

T bar is non-flammable and conforms to the national grade B1 standard (GB8624-2012 Grade B1).

2. Water-proofing and moisture-proofing

The product is allowed to long-term expose to moist environment.

3. Easy to install

T bar is easy to cut, saw nail, stick. it has a smooth finish one side that can be taped and jointed ready for decoration including wallpapering, painting, texture coat and veneer, and a rougher side for tiling.

5. Environment

T bar does not contain any organic solvents, formaldehyde, asbestos, oils or other toxic substances that can have a negative impact on the environment and waterways.


Specification size

2900mm

Surface Finish

High UV coating

Thickness

1-9mm

Color

Customized colors

Hardness

3H-6H

Materials

PVC

Type

T bar

Installation

Easy installation

Life Span

15 years

Place of original

China

aluminium strip

pvc wall panel




T bar

Aluminium Bar,Plastic Ceilings Tbar,Suspended Ceiling T bar,Galvanized Ceiling Tbar

Shandong Kingmarble Decoration Materials Co.,Ltd , https://www.pvcpanel.de